Combines all the advantages of a hydraulic press with the speed of a flywheel press.
The cylinder's piston-ram is the only load carrying moving part! There is no flywheel, clutch brake or crankshaft. Shut height and stroke are adjustable and easily set. Stalling the press causes no damage. Its quiet, fast cycling capability comes from Conway's patented, dual-speed cylinder.
Features:
- Dual speed cylinder with high speed extend and retract.
- 4 inch stroke, fully adjustable within 9 inch cylinder travel.
- Open frame design allows unlimited part length both front-to-rear and side-to-side.
- Welded steel frame for maximum rigidity and minimum deflection.
- Easily adjustable ram shut-height.
- Instant ram return when closing signal is broken.
- Change setup in only a few minutes.
- Rapid, long-life spring return with over-travel protection.
- Bench or stand mountable.
- Low maintenance & low power consumption.
- Durable, easily accessible, and serviceable with 4.5 gallon oil reservoir with minimum heat rise. Environmentally friendly with less oil in use.
- Heavy, 2 inch thick top and bottom plates.
- Ample conveyor clearance under press.
- 2 Year Warranty against manufacturer's defects
| Choosing a C-Series Model |
|
The Conway Press C-Series is available in (3) models (C-15-C, Try our online Press Stroke Calculator and Tonnage Calculator to help determine the best press to meet your needs. By entering the Advance and Return stroke distances, the calculator will compute the theoretical strokes/minute for each of the C-Series models. By entering the Advance and Return stroke distances, the calculator will compute the theoretical strokes/minute for each of the C-Series models. Please contact us to assist you in selecting which C-Series model will best suit your press needs. |
Power Unit:
- Heavy duty motor
- Durable gear pump
- Oversized suction filter
- 10 micron, screw-on return filter
- Visual oil temperature and level gauge
- Pressure gauge
- Filtered air breather
- 4-1/2 gallon oil capacity (ISO 46)
Controls:
- All controls require 120 VAC supply
- Two concurrent push buttons
- Electrical contacts available for guard
- Interlock switches
- Shut height set switch
- Keyed lock-out
Options:
- E-stop
- Infrared touch controls
- Foot switch kit
- Custom controls available
- Adjustable force control
- Adjustable Pressure Switch
- Counter
- Press stand
- Work table
- Fire Resistant Oil and Seals
C Series Comparison Table
| C-15-C | C-20-C | C-20-C+ | |
| Tons (adjustable) | 15 | 20 | 20 |
| Daylight (max. open) | 12.5 inches | 12.5 inches | 12.5 inches |
| Stroke (adjustable) | 9/4 | 9/4 | 9/4 |
| Minimum Shut Height | 3.5 | 3.5 | 3.5 |
| Bolster Table L-R x F-R x Thickness |
14" x 9" x 2" | 14" x 9" x 2" | 14" x 9" x 2" |
| Ram Button | 2 in. Diameter | 2 in. Diameter | 2 in. Diameter |
| Throat | 5 inches | 5 inches | 5 inches |
| |||
| Working Pressure | 2,500 psi | 3,200 psi | 3,200 psi |
| Ram Speeds | |||
| Advance, IPM | 780 | 465 | 780 |
| Press, IPM | 25 | 55 | 80 |
| Open, IPM | 1,000 | 1,000 | 1,000 |
| |||
| Motor | |||
| 230/460 V., 3 Phase | N/A | 3 HP | 5 HP |
| 2 HP | N/A | N/A | |
| |||
| Pump GPM | 5/1.4 | 3 | 5 |
| Tank Capacity (gal) | 4.5 | 4.5 | 10 |
| |||
| Cylinder Bore | 4 inches | 4 inches | 4 inches |
| Ram Diameter | 1.375 | 1.375 | 1.375 |
| |||
| Dimensions | |||
| H x W x D (inches) | 45.5" x 19" x 28" | 45.5" x 19" x 28" | 45.5" x 19" x 28" |
| Press Weight (lbs.) | 525 | 525 | 525 |
| Power Unit Weight (lbs.) | 135 | 130 | 265 |
| Shipping Weight (lbs.) | 710 | 710 | 845 |